How to Determine Vessel Emissions
Is your client requesting you to provide your carbon footprint? Or other emissions, like NOx? We can help!
This is a step-by-step guide on how to determine vessel emissions based on fuel consumption. It consists of three steps: determine your fuel consumption, determine your emission factors and calculate your emissions! You can download a PDF, or make us of our calculation tool to determine your emissions within 2 minutes.
+ Step 1. Determine fuel consumption
The first step is to determine the type of fuel that is used, and the fuel consumption of your vessel in metric tons. For most companies operating vessels, fuel type and consumption can be taken from daily progress reports or bunker fuel notes.
Calculate mass based on volume
In case only the volume of fuel is known to you, weight can be determined by multiplying the volume times the density of the fuel type. For example, 1 m3 of MDO equals 0.89 metric tons of MDO.
+ Step 2. Determine emission factors
Each type of fuel has associated emissions, the most important being CO2, NOX, SOX, PM (Particulate Matter) and CH4. The table below shows the amount of emissions in kilograms when 1 metric ton of fuel is burned (source: IMO Greenhouse Gas Study 2020 table 53). With fuel consumption and emission factors known, you can now calculate emissions. *The averages of IMO GHG Study 2020 have been taken [kg/mT].
+ Step 3. Calculate emissions
You can determine emissions by using the following equation:
Emission [kg] = Fuel Consumption [mT] x Emission Factor [kg/mT fuel]
Example (1) Larry has a crane vessel called Crany McCraneface that consumes 10 metric tons of MGO per day. He wants to know the carbon footprint of Crany McCraneface. Table 2 shows him that the emission factor of CO2 for MDO is 3206, resulting in 32,060 kilograms of CO2 emissions per day, or 32.06 metric tons.
Example (2) Mary has an LNG tanker called Tanky McTankface that consumes 10 cubic meters of LNG per day. She would like to know the CO2 and CH4 emissions. Table 2 shows her that the emission factors of LNG for CO2 and CH4 are 2750 and 8.27 respectively, resulting in 27,500 kilograms of CO2 and 82.7 kilograms of CH4 per day.
+ References
IMO - Fourth IMO Greenhouse Gas Study 2020
IMO – MEPC.281(70)
ISO 8217 – Fuel standard for marine fuels
+ Disclaimer
It is assumed that for this guide, the reader is equipped with general knowledge on offshore and maritime industry, power generation on-board vessels and emission calculation methodology. Always take good care in verifying the emissions yourself, Mr. Sustainability cannot guarantee the outcome for individual and specifically unique calculations. No rights can be derived from this information.
Engine Settings affect emission factor (!)
It should be noted that these emission factors are (in some cases) heavily influence by engine settings. In the case with NOX for example, the amount of emissions can vary significantly. The variation for CO2 is much less and is primarily based on the carbon content of the fuel. Another factor to be taken into account, is methane slip for LNG engines, which could increase carbon equivalent footprint. In order to effectively and truly measure emissions, it is advised to install a continuous emissions monitoring system (CEMS).
+ Still have questions or need help?
Ask your question in our community (below) and we will help you as soon as possible!
No time to do it yourself?
Use the below vessel emission tool to determine your emissions within 2 minutes.
Do you still have any questions remaining? Ask the community for help!
Would you like to have clear insights into your energy and emissions? We are working on Flind, a dashboard that gives you exactly that. Flind is still a baby - a work in progress - but imagine what he could be when he grows up!